Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Door/Hatch
Model Year: 2008 Model: Sequoia Doc ID: RM000002XJM00AX
Title: DOOR / HATCH: BACK DOOR OPENER SWITCH: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE POWER BACK DOOR ROD (w/ Power Back Door) DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

2. REMOVE BACK DOOR CENTER GARNISH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

3. REMOVE BACK DOOR SIDE GARNISH RH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

4. REMOVE BACK DOOR SIDE GARNISH LH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

5. REMOVE BACK DOOR STRAP COVER DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

6. REMOVE BACK DOOR PULL STRAP DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

7. REMOVE BACK DOOR TRIM BOARD ASSEMBLY DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

8. REMOVE BACK DOOR SERVICE HOLE COVER DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

9. REMOVE BACK DOOR OUTSIDE HANDLE

(a) Disconnect the connector.

(b) Disengage the clamp.

(c) Remove the 2 bolts and remove the back door outside handle.